Satin Xtrem Oxirite

PRODUCT DESCRIPTION
Water antioxidant enamel applied directly to ferrous metals without prior primer application. It incorporates special raw materials such as an acrylic high solids styrene resin which gives a high resistance to corrosion, moisture and water as well as excellent adhesion on different substrates. For formulation they have been chosen highly anticorrosive pigments
effective, non-hazardous and free of heavy metals. These act by ion exchange while preventing the attack of rust, which will make forming a protective layer on the metal which provides greater long term resistance.

Fields of application
Ferrous metal surfaces.

Features
• Corrosion and antioxidant.
• Neutralizer oxide.
• Outstanding adhesion.
• Direct application on rust.
• It can be applied on rusty surfaces,
previously removing loose particles.
• Satin finish.
• Fast drying. Recoat 2 h. approx.
• Easy to apply. No dripping. Excellent brochabilidad.
• Weak odor that disappears when dry.
• Water Base
• Complies with VOC 2010

Colors
Satin: White, Black, Blue, Green, Dark Green, Brown, Black and Red Coach.

Packaging sizes
750 mL and 4 L.

HOW TO USE

Surface preparation
Apply to clean, dry surfaces.
Remove non adhering coatings, pickling,
scraping or sanding.
They do not require pre-priming
adherent.

Useful application
Brush or roller gun and short hair.

Application
Apply the product undiluted.
For good protection, apply at least
two hands.

Useful cleaning
Water and soap.

TECHNICAL DATA
Density at 20 ° C: 1.20 ± 0.05 g / mL
Yield: 5 m2 / L, using a minimum dry thickness of 100 microns.
Drying under normal conditions: Less than 1 hour. Recoating: 2 hours
Brightness 60: 200μ on black, 24 h -> 50 approx.